Cleaner, More Comfortable Road Trips
Protect your vehicle’s back seat from pet hair, muddy paws, moisture, scratches, and everyday travel messes with the PawRide™ Waterproof Dog Car Seat Hammock.
Designed with six-layer construction and an internal PP support platform, PawRide™ creates a wider, more stable back-seat area while providing hammock-style coverage across the seat, footwell, and vehicle doors.
A breathable center mesh window allows airflow and visibility between the front and rear areas, while built-in storage pockets keep compact pet travel essentials within easy reach.
Why Pet Parents Love It
Six-Layer Seat Protection
The multi-layer construction helps protect vehicle surfaces from pet hair, dirt, muddy paws, moisture, food debris, and everyday wear during travel.
Structured Hard-Bottom Platform
The internal PP support panels bridge the rear-seat footwell, creating a wider and more level surface for your dog to sit or lie down during the journey.
The manufacturer lists a maximum supported load of up to 440 lb when the product is installed correctly in a compatible vehicle. Always confirm proper installation and inspect the support panels before use.
Waterproof 600D Oxford Fabric
The heavy-duty 600D Oxford exterior helps prevent common spills, moisture, and wet paws from reaching the vehicle’s upholstery.
Hammock-Style Coverage
The front and rear panels create hammock-style coverage across the back-seat area, helping block access to the floor and providing additional protection behind the front seats.
Protective Side Panels
Extended side flaps help cover the vehicle doors and seat edges while making it easier for your dog to enter and exit the vehicle.
Breathable Center Mesh Window
The center mesh panel promotes airflow and gives dogs visibility toward the front of the vehicle without removing the protective barrier.
Non-Slip Bottom
The textured underside helps reduce unwanted movement across compatible vehicle seats during normal driving conditions.
Built-In Storage Pockets
Convenient storage compartments provide space for lightweight travel essentials such as waste bags, wipes, treats, leashes, and collapsible bowls.
Quick Installation and Removal
Adjustable headrest straps, buckles, seat anchors, and included door straps support straightforward installation in compatible vehicles.
Key Features
- Six-layer protective construction
- Structured PP support platform
- Waterproof 600D Oxford fabric
- Hammock-style back-seat coverage
- Protective side-door panels
- Breathable center mesh window
- Non-slip underside
- Built-in storage pockets
- Adjustable headrest straps and buckles
- Designed for many cars, SUVs, and trucks
- Black quilted finish
- Ships from a US warehouse
Product Dimensions
- Overall Unfolded Size: 80.9 × 64.56 inches
- Main Rear-Seat Width: Approximately 51.57 inches
- Side-Panel Section: Approximately 27.16 inches
- Upper Seat-Back Section: Approximately 22.44 inches
- Mesh-Window Height: Approximately 15.74 inches
- Folded Support Panel: Approximately 27.55 × 18.5 × 2.75 inches
Please measure your vehicle’s rear-seat area before ordering. This product requires compatible front and rear headrests or headrest bars for proper installation.
Product Specifications
- Product Type: Dog car back-seat cover and hammock
- Primary Material: 600D Oxford fabric
- Support Material: PP plate panels
- Padding: Cotton filling
- Color: Black
- Manufacturer-Listed Load Capacity: Up to 200 kg / 440 lb
- Adjustable Door-Strap Length: 23.22–40.55 inches
- Overall Unfolded Size: 80.9 × 64.56 × 0.19 inches
- Product Weight: Approximately 6.58 lb
- Package Size: 24.8 × 17.72 × 2.36 inches
- Package Weight: Approximately 7.02 lb
Vehicle Compatibility
PawRide™ is designed to fit many cars, SUVs, and trucks with compatible rear seating and headrest bars.
Because vehicle interiors vary, this product is not guaranteed to fit every make, model, or seating configuration. Before placing an order:
- Measure the width and depth of the rear-seat area.
- Confirm that the vehicle has compatible front and rear headrests or headrest bars.
- Check the position of the doors, seat-belt openings, and center console.
- Compare your measurements with the product dimensions shown above.
How to Install
- Unfold the car-seat cover completely.
- Place the structured support panels across the rear-seat area.
- Attach the rear straps securely around the rear headrests.
- Attach the front straps around the front-seat headrests.
- Insert the seat anchors between the seat base and seat back, if included.
- Raise the protective side panels and attach the adjustable door straps to compatible grab handles or mounting points.
- Adjust all straps until the cover sits evenly and securely.
- Check that the cover does not obstruct vehicle controls, doors, seat belts, air vents, or the driver’s visibility.
Cleaning Instructions
- Remove loose pet hair with a vacuum cleaner or lint roller.
- Wipe light dirt and spills with a soft, damp cloth.
- Use a gentle rinse only on removable non-structural sections when permitted by the care instructions.
- Remove structural PP panels before deep cleaning if the product design allows.
- Allow all components to dry fully before reinstalling.
- Do not machine wash or dry the complete product unless specifically permitted by the manufacturer.
- Do not use bleach or harsh cleaning chemicals.
Package Includes
- 1 × PawRide™ Dog Car Seat Cover
- 2 × Adjustable Door Straps
- Integrated support panels, headrest straps, mesh window, and storage pockets as shown
Important Travel Information
This product is primarily designed to protect vehicle interiors and create a more organized rear-seat travel area. It is not a crash-tested pet-restraint system unless the manufacturer provides separate, verifiable certification.
Use an appropriately fitted vehicle restraint or travel harness in accordance with its manufacturer’s instructions. Never attach a vehicle tether directly to a pet’s collar.
Inspect the fabric, straps, buckles, mesh, stitching, and support panels before every trip. Discontinue use if any component becomes loose, torn, cracked, bent, or damaged.
Never leave a pet unattended in a parked vehicle. Monitor temperature, ventilation, and your pet’s condition throughout every journey.
Frequently Asked Questions
Will this seat cover fit every vehicle?
No. PawRide™ is designed for many cars, SUVs, and trucks, but vehicle dimensions and seating configurations vary. Measure your rear-seat area and confirm that compatible headrest bars are available before ordering.
Does the cover have a hard bottom?
Yes. The cover includes internal PP support panels designed to bridge the rear-seat footwell and create a wider, more level travel surface.
Is the cover waterproof?
The 600D Oxford exterior is designed to resist common spills, moisture, and wet paws. Clean spills promptly and avoid allowing liquid to remain on the product for extended periods.
Is the 440 lb capacity guaranteed in every vehicle?
The manufacturer lists a maximum supported load of 440 lb. Actual performance depends on correct installation, vehicle dimensions, support-panel positioning, and the condition of all components.
Does this product replace a pet seat belt or travel harness?
No. The cover is designed primarily to protect the vehicle and create a broader rear-seat area. Use a properly fitted vehicle restraint or travel harness separately.
Can the complete cover be machine washed?
Unless the manufacturer specifically confirms machine washing, clean the product using a vacuum, lint roller, or damp cloth. Keep structural support panels away from washing machines and dryers.
Actual Product Photo
Reviews
There are no reviews yet.